KAJI EKSPERIMENTAL PENGARUH TEMPERATUR AIR QUENCHING TERHADAP KARAKTERISTIK MEKANIK PADA DISSIMILAR WELDING BAJA TAHAN KARAT AISI 304 DENGAN BAJA KARBON S45C MENGGUNAKAN LAS GMAW SEBAGAI BAHAN AJAR MATA KULIAH TEKNOLOGI PENGELASAN

Pratama, Pungki Ade (2015) KAJI EKSPERIMENTAL PENGARUH TEMPERATUR AIR QUENCHING TERHADAP KARAKTERISTIK MEKANIK PADA DISSIMILAR WELDING BAJA TAHAN KARAT AISI 304 DENGAN BAJA KARBON S45C MENGGUNAKAN LAS GMAW SEBAGAI BAHAN AJAR MATA KULIAH TEKNOLOGI PENGELASAN. Universitas Sebelas Maret.

[img]
Preview
PDF - Published Version
Download (223Kb) | Preview

    Abstract

    Pungki Ade Pratama. AN EXPERIMENTAL STUDY ABOUT THE INFLUENCE OF WATER QUENCHING TEMPERATURE TOWARDS THE MECHANICAL PROPERTIES OF DISSIMILAR WELDING AT AISI 304 STAINLESS STEEL AND AT S45C CARBON STEEL BY USING GMAW WELD AS THE LEARNING MATERIAL IN THE WELDING ENGINEERING COURSE. Thesis, Faculty of Teachers Training and Education Universitas Sebelas Maret Surakarta. january 2015. The objectives of this study are: (1) In order to know the influence of quenching temperature towards the hardness in the welding of dissimilar welding at AISI 304 stainless steel and at S45C carbon steel. (2) In order to find out the impact of quenching temperature towards the tensile strength in the welding of dissimilar welding at AISI 304 stainless steel and at S45C carbon steel. (3) To discribe mechanical proprties in the result of dissmilar welding at AISI 304 stainless steel and at S45C carbon steel with the different treatment quenching temperature variation. The welding process and the specimen-making were conducted at Inlastek Welding Laboratory in Pajang Surakarta. The specimen-testing was conducted at D3 of Faculty of Engineering Laboratory in UGM. The total of the specimen in this study were four in which three specimen were conducted by using some varieties of quenching temperature and one specimen was not conducted by using any quenching temperatures. In this study, the data analysis technique used was descriptive quantitative. The sample which is used in this study is purposive sampling. The sample that is used in this study is the result of the dissimilar welding at AISI 304 stainless steel and at S45C carbon steel by using GMAW weld.

    Item Type: Other
    Subjects: L Education > L Education (General)
    T Technology > TA Engineering (General). Civil engineering (General)
    Divisions: Fakultas Keguruan dan Ilmu Pendidikan > Pendidikan Teknik Mesin
    Depositing User: Users 11034 not found.
    Date Deposited: 04 Sep 2015 12:34
    Last Modified: 04 Sep 2015 12:34
    URI: https://eprints.uns.ac.id/id/eprint/17820

    Actions (login required)

    View Item