KARAKTERISASI TINGKAT KEKASARAN PERMUKAAN BAJA ST 40 HASIL PEMESINAN CNC MILLING ZK 7040 EFEK DARI KECEPATAN PEMAKANAN (FEED RATE) DAN AWAL WAKTU PEMBERIAN PENDINGIN

Purbosari, Dhiah and Saputro, Herman and Wijayanto, Danar Susilo (2012) KARAKTERISASI TINGKAT KEKASARAN PERMUKAAN BAJA ST 40 HASIL PEMESINAN CNC MILLING ZK 7040 EFEK DARI KECEPATAN PEMAKANAN (FEED RATE) DAN AWAL WAKTU PEMBERIAN PENDINGIN. Nosel, 1 (2). pp. 1-15.

[img] PDF - Published Version
Download (613Kb)

    Abstract

    The purpose of this research was to determine the level surface roughness characterization of steel ST 40 results ZK 7040 CNC Milling machining effect feed rate and the early timing of cooling. This research was conducted at SMK WARGA Surakarta Laboratory. Machining process using ZK 7040 CNC Milling machines with control SIEMENS SINUMERIK 802S. Data obtained by measuring the level of roughness of the workpiece using a SURFCODER SE-1700 at Bahan Teknik D3, Univesitas Gadjah Mada Laboratory. This research method using descriptive analysis with independent variable were feed rates and the early timing of cooling, dependent variable was levels of surface roughness of steel ST 40. The results on the feedrate 0.11 mm / rev, 0.13 mm / rev and 0.15 mm / rev indicates that the higher the feedrate is used to produce the level of the rough workpiece roughness. In the early timing of the air 10 minutes, 15 minutes and, 20 minutes showed that the longer the first timing of cooling used in the CNC machining process Milling ZK 7040 on steel ST 40, would result in the level of the rough workpiece roughness. This research resulted in varying levels of surface roughness between N6 to N8. The level of roughness of the workpiece machining CNC Milling results ZK 7040 on steel ST 40 that the smallest on the conditions before the beginning of the cooling at feed rate 0.11 mm / rev and the early cooling time 10 minutes is equal to 1.616 μm, while the greatest rudeness occurs the feed rate of 0.15 mm / rev and the early timing of the air 20 minutes is equal to 3.603 μm. The level of roughness of the workpiece machining CNC Milling results ZK 7040 on steel ST 40 that the smallest on the conditions after the timing of cooling on CNC milling machining process ZK 7040 occurred at a feed rate of 0.11 mm / rev and the early timing of cooling after 10 minutes is equal to 1.855 μm while the roughness of the greatest place on the feed rate of 0.15 mm / rev and the early timing of cooling after 20 minutes is equal to 5.782 μm. Keywords: feed rate, early timing of air, surface roughness, steel ST 40, CNC Milling

    Item Type: Article
    Subjects: T Technology > TJ Mechanical engineering and machinery
    Divisions: Fakultas Keguruan dan Ilmu Pendidikan > Pendidikan Teknik Mesin
    Depositing User: Devi Nurlita Sari
    Date Deposited: 09 Jul 2013 19:36
    Last Modified: 09 Jul 2013 19:36
    URI: https://eprints.uns.ac.id/id/eprint/1368

    Actions (login required)

    View Item